STAVRscoop Stainless Steel SAND SCOOP, for Beach and Watter Metal Detecting Hunting

1 Lot of Matched quad (4 pcs.) 6P14P-K (6П14П-K) REFLECTOR 
RUSSIAN EXTRA HIGH QUALITY TUBE ,NEW! NOS.

 MILITARY acceptance! RARE!
~ EL84 N709 6BQ5  NEW

Index "K"- high mechanical strength and reliability with enhanced vibration resistance,
 and are equivalent to EL84, 6BQ5, 7189 Originally made for the the Russian Military at the Reflector Plant in Saratov. 
These tubes are the perfect substitute for the output tubes for most guitar amplifiers as VOX, Marshall, Mesa Boogie and HIWATT.

6P14P-EP
Miniature output pentode of increased durability, radiation resistant.
Designed to amplify low frequency power.
Durability of at least 5,000 hours.
Weight is not more than 20 g.

Technical characteristics and electrical parameters of the lamp 6P14P-EP:
Filament voltage 6.3 ± 0.6 V
Filament current 760 ± 60 mA
Anode voltage rated (constant) 250 V
Anode voltage limit 300 V
Anode current 48 ± 8 mA
Cathode current limit 65 mA
The grid voltage is the second rated (constant) 250 V
Second voltage limit (constant) 300 V
Second grid current no more than 7 mA
Power dissipated by the anode, maximum 14 W
Power dissipated by the second grid, maximum 2 W
Voltage between cathode and heater limit (constant) 100 V
Slope 11.3 mA / V
The gain in triode inclusion is about 20
Internal resistance 30 kOhm
Resistance in the cathode circuit for automatic bias 120 Ohm
Input capacitance is about 11 pF
Output capacitance is about 7 pF
Capacitance throughput about 0.2 pF
Miniature glass decoration

Write a review

Note: HTML is not translated!
    Bad           Good

6P14P-K

  • Product Code: 6P14P-K matched quartet (4 pcs.)
  • Availability: In Stock
  • 42.00 $


Featured

Sand scoop EVROEXCAVATOR-2 V.22 handle 32 мм = 1 1/4"

Sand scoop EVROEXCAVATOR-2 V.22 handle 32 мм = 1 1/4"

- Designed especially for water and surf. Ground conditions: coarse sand, pebbles, broken shell. Exc..

145.00 $

SAND SCOOP MONSTRIK-9 (Production temporarily discontinued)

SAND SCOOP MONSTRIK-9 (Production temporarily discontinued)

- Excelent for tough job in water with extreme ground conditions: clay and silt clogged sand with s..

130.00 $

CARBON FIBER TRAVEL HANDLE 32MM ( 1 1/4 ")

CARBON FIBER TRAVEL HANDLE 32MM ( 1 1/4 ")

Stavr Carbon Fiber travel handle 32 mm ( 1 1/4 ") It is convenient for air travel and other cas..

130.00 $

Sand scoop EVROEXCAVATOR-2 V.33  handle 30.7 мм = 1 1/5"

Sand scoop EVROEXCAVATOR-2 V.33 handle 30.7 мм = 1 1/5"

- Designed especially for water and surf. Ground conditions: coarse sand, pebbles, broken shell..

155.00 $

EVROEXCAVATOR-3 V.30 (Production temporarily discontinued)

EVROEXCAVATOR-3 V.30 (Production temporarily discontinued)

-Designed for use in water & surf line , or quick-flowing sand.The increased volume of the baske..

199.00 $

SAND SCOOP MONSTRIK-6 (Production temporarily discontinued)

SAND SCOOP MONSTRIK-6 (Production temporarily discontinued)

- Unique scoop. Has smallest holes (6,4mm). Best for for small ancient coins and finest jewelry..

160.00 $

Sand scoop EVROEXCAVATOR-2 V.22  handle 30.7 мм = 1 1/5"

Sand scoop EVROEXCAVATOR-2 V.22 handle 30.7 мм = 1 1/5"

- Designed especially for water and surf. Ground conditions: coarse sand, pebbles, broken shell. Exc..

145.00 $

O-Ring 4x1,5x7mm , Nitrile Butadiene Rubber FOR MINELAB EXCALIBUR repair 15 pcs .

O-Ring 4x1,5x7mm , Nitrile Butadiene Rubber FOR MINELAB EXCALIBUR repair 15 pcs .

O-Ring Minelab Excalibur repair 15 pcs. 4 x 1.5 x 7 mm    Nitrile Butadiene..

5.00 $

(Production Discontinued) SAND SCOOP KREPISH V.11

(Production Discontinued) SAND SCOOP KREPISH V.11

 - Recommended for work in water and dry sand. Ground conditions: fine clean sand &nb..

145.00 $

(Production Discontinued)  5GRANIK-2

(Production Discontinued) 5GRANIK-2

Depth 165mm (6,5'')Height 290mmHole 9,5mm (0,374")internal pipe size for handle ..

145.00 $

WATERPROOF IP68 CONNECTOR 4 PIN,FOR MINELAB EXCALIBUR KIT

WATERPROOF IP68 CONNECTOR 4 PIN,FOR MINELAB EXCALIBUR KIT

Waterproof IP68 connector 4 pin, for Minelab Excalibur modification coil & repairmale   &nb..

14.00 $

Tooths for a beach rake

Tooths for a beach rake

Stavr Rake toothsLength -110 mm (4.2 inches)Stanless steel 2 mmWeight -0.09 kg (0.2 lbs)mountin..

7.00 $